Water Tank Pumps

Water Pumps

SPECIAL: 5% discount off all items this month (take 5% off listed prices) 

We have a variety of different water tank pumps on offer. They are all excellent quality.

We also supply a mains water diverter to automatically swith over to the mains water supply when the water tank runs dry.
Unless you can use gravity for water pressure we recommend you buy a pump to connect to your water tank. 

Bianco Pumps

All Bianco Pumps come with a 2 year warranty. They are Australian owned and designed. Prices include GST and delivery within Australia.

Model/ Part No

Price

(incl. GST)

Total Suction Head / Mtrs

0m 3m 5m 6m

P/Switch Set (kpa)

Max Pump Connections

No. of Taps

Weight (kg)

Power

BIA-INOX60PC

$350.90

36 28 24 21

120-320

320kpa (46psi)

36litres/min

4 taps

9.1kg

600W

240V

BIA-INOX80PC

$394.90

43 34 28 25

150-400

400kpa (58psi)

43litres/min

5 taps

9.4kg

800W

240V

BIA-INOX120PC

$438.90

50 39 33 29

120-430

430kpa (62psi)

50litres/min

6 taps

9.8kg

1200W

240V

BIA-MULTI900PC

$515.90

Heads to 36m

352-548

548 kPa (80psi)

80litres/min

11 taps

10.7kg

800W

240V

BIA-MULTI1300PC

$570.90

Heads to 56m

352-548

548 kPa (80psi)

80litres/min

11 taps

13.8kg

900W

240V

 


Bianco Stainless Steel Water Tank Pressure Pumps – BIA-INOX 60PC/80PC/120PC

Fully electronic pumps designed for domestic water supply for urban and rural water storage tanks. Pressures up to 430kpa. Designed completely from non-ferrous materials to avoid the effects of corrosion. Can operate continuously from low to full flows. Automatic electronic control has in-built check valve. Auto loss of water cut off. Rotatable controller connection. Electrical surge protection. Integrated handle and base. Available in 4, 5 and 6 tap versions.

These pumps are a self-priming pressure system pump supplied wired and ready to install. The self-priming ability provides excellent suction capacity. Used especially for supplying water to domestic installations.

The pumps are characterised by: Bianco Pressure Pump

·       Automatic electronic pump control fitted and wired.

·       Automatic electronic control provides run dry protection and constant pressure at low flows.

·       Automatic electronic control has in-built check valve.

·       Corrosion resistant pump body, diffuser and impeller.

·       Mechanical shaft seal.

·       240V single phase TEFC motor with in-built auto reset thermal overload.

Liquid:

Clean water temperature range: 2 – 35 deg C

Materials:

Pump body, Diffuser, Impeller: Stainless Steel, Technopolymer

Mechanical seal: Carbon/Ceramic/Nitrile

O rings: Nitrile

Installation:

Maximum ambient temperature: 40 deg C

Maximum operating pressure: 6 bar

Pipe connections suction/discharge: 1” BSP F / 1” BSP M (25mm x 25mm)

Electrical data:

Rated voltage: 240V

Mains frequency: 50 Hz

Current: 2.6 amps (BIA-INOX60PC & BIA-INOX80PC), 3.5 amps (BIA-INOX120PC)

Capacitor: 20 uF

Motor duty: Continuous

Motor type: Asynchronous, TEFC

Motor protection: In-built thermal overload

Ingress protection: IP 54

Insulation class: F

Power cable length: 1.2 m

Pump Dimensions: 490 x 210 x 260mm

Click here to download the Instruction Manual and Warranty for the BIA-INOX 60PC/80PC/120PC Pumps

 

Stainless Steel Multistage Electronic Pumps: BIA-MULTI900PC and BIA-MULTI1300PC

Self Priming. Starts automatically when a tap is turned on.

Operates constantly from low flow to full flow.

Stops automatically when the last tap is turned off. Run dry protection.

Corrosion resistant stainless steel construction.

Auto restart controller, automatically looks for water if pump runs out of water.

Ideal for: domestic water supply for homes and cottages, irrigation and car washing.

General water transfer systems. Pressures up to 548 kPa (80psi). 

The self-priming ability provides excellent suction capacity.

Used especially for supplying water to domestic installations.

These pumps are a Horizontal Multistage self-priming electronic pressure system pump supplied wired and ready to install.

The pumps are characterised by: Bianco Pressure Pump Multi900PC

·       Automatic electronic pump control fitted and wired.

·       Automatic electronic control provides run dry protection and constant pressure at low flows.

·       Automatic electronic control has in-built check valve and Auto-Restart system to look for water.

·       Corrosion resistant pump body, diffuser and impeller.

·       Mechanical shaft seal.

·       240V single phase TEFC motor with in-built auto reset thermal overload.

 

Clean water temperature range: 2 – 35 deg C

Materials:

Pump body, Diffuser, Impeller: Stainless Steel, Technopolymer

Mechanical seal: Carbon/Ceramic/Nitrile

O rings: Nitrile

Installation:

Maximum ambient temperature:  40 deg C

Maximum operating pressure: 6 bar

Pipe connections suction/discharge: 1” BSP F / 1” BSP M

Electrical data:

Rated voltage: 240V

Mains frequency: 50 Hz

Current: 3.4 amps (BIA-MULTI900PC), 3.8 amps (BIA-MULTI1300PC)

Capacitor: 16 uF (BIA-MULTI900PC), 20 uF (BIA-MULTI1300PC)

Motor duty: Continuous           

Motor type: Asynchronous, TEFC

Motor protection: In-built thermal overload

Ingress protection: IP 54

Insulation class: F

Power cable length: 1.2 m

Net weight: 10.7 kg

Dimensions: 340mm L x 405mm H x 230mm W

Liquid:

 

Bianco Rainsaver MK111 Mains Water Diverter (water mark approved)

PRICE: Bianco Rainsaver

$679.80 (incl. GST) with the BIA-INOX60PC Pump listed above

$844.80 (incl. GST) with the BIA-MULTI900PC Pump listed above

CONTROL FEATURESBianco Rainsaver Mains Water Diverter

• Revolutionary Patented design, no mechanisms

• Requires no power supply and consumes NO electrical energy

• Designed to operate with pumps up to 800kpa (116psi)

• 100 litres per minute flow for large homes and commercial applications

• Aesthetically designed and requires no weather proofing

• Can be mounted any distance from the pump underground or inside a tank

• Barrel unions and “Torque Set” safety spanner are included to facilitate ease of servicing and to avoid tool damage or over tightening

• Completely waterproof can be hosed down without the fear of electrocution

• UV stabilized technopolymer for long life and good looks

• Modern ergonomic design along with a neutral color does not detract from the look of your home.

• All Rainsaver MKIII pumps are independently controlled to regulate flows and pressures whilst protecting the pump against voltage fluctuations, loss of water and incorporate a 24 hour automatic pump restart

• WATERMARK approved for connection to all Town Water supplies. Safe against, water borne bacteria, dezincification and lead poisoning

• Auxiliary outlet allows for “energy saver” water storage – pressure vessels to reduce pump starts

• No unsightly controller power, water level float cables or the need for a dedicated controller power point

• Revolutionary “Mono Channel” design does not restrict flow or reduce pressures, eliminates any possibility of water leaks

• Easy to clean, pump and town water inlet strainers are included to prevent blockages in dishwashers, washing machines, sprinklers etc.

• Australian owned and designed

• 2 Year Rainsaver MKIII Infield Warranty

Note: The Bianco Rainsaver MK111 is sold as a package with a pump. Other pumps available upon request.

 

Click here to download the Bianco Rainsaver MK3 Mains Water Diverter Brochure

Click here to download the Bianco Rainsaver MK3 Installation and Operating Instructions

Click here to download the Bianco Rainsaver MK3 Watermark Certificate

Click here to download the Bianco Rainsaver MK3 Associated Pumps Watermark Certificate


   

Pump Cover Pump Cover
- Price: $85.00
- Made from UV stable polyethylene
- 700mm length, 400mm wide, 550mm height
- This cover will suit all domestic pumps
- All electric driven pumps must be kept dry
- For colours available please go to our Tank Colours page
- The pipes can be installed through holes that are quite easy to cut into the ends or sides of the cover
- Additional freight charge will apply if ordered without water tank

  

To give you an idea of water pressure rates:
Council mains are usually 276 kPa (40 psi)
Household pumps range from 103-276 kPa (15-40 psi)
A tank on a stand at 10 mtrs (33ft) will give 103 kPa (15 psi)
1 metre gives 10.3 kPa (1.5 psi)
psi = pounds per square inch
kPa = kilopascal

All pump prices listed include GST and delivery in NSW, QLD, VIC, ACT and SA.

Rainwater Tank Pumps

Trying to find rainwater tank pumps online for your rainwater collection tank? If you need a water tank pump, you have found the right place. Buy tank pump products and other rainwater tank accessories from us at RainWaterStorageTank.com.au today! We have a variety of product categories for you to look through in order for you to find what you need quickly and easily. Browse our site by using the links that may be found anywhere on the page. You're sure to find a rainwater collection tank that will meet your needs.